OUR PRODUCTS
Our products are made for durability, energy efficient with low maintenance. Our specialised professionals ensure that quality parts suitable for the operating environment are selected and the system is assembled by a team of highly skilled craftsmen to ensure minimal maintenance hassle. Customization is available to ensure your specific requirements can be met.
OUR FEATURED
PRODUCTS
Reverse Osmosis System (BWRO & SWRO)
There are many different RO systems available in the market. However many pitfalls are faced by clients when selecting a RO system. Badly designed RO systems will cause faster fouling of the RO membranes increasing maintenance costs while use of inferior or unsuitable components will reduce the lifetime of the system resulting in increased replacement costs.
Thus it is important to ensure not only the RO system is properly designed to meet your requirements, the selection of good components and high quality workmanship is also paramount. With these principals in mind, our RO systems are built to give value to our client’s investment.
Find out more...
Recirculating Aquaculture System (Using EOH2OTM)
The purpose of using EOH2O technology for aquaculture is to achieve higher stocking loads, while reducing the transference and/or occurrence of loss due to disease outbreak. The EOH2O is able to:
-
Reduce water wastage thru recycling and reuse
-
Provide a bio-security environment
-
Reduces and maintain suitable level of ammonia, nitrite, and nitrate without need for daily water changes
-
Maintain high level of Dissolved Oxygen for microbial and aquatic species metabolic rates
· Reduce phosphate (P2O4)
-
Reduce TSS (total suspended solids)
-
Oxidise, precipitate and removal of soluble Iron, Copper, and Arsenic
-
Inactivate various pathogenic organisms
-
Limit and/or remove the need to use injectable and/or topical antibiotic and oxidizing agents (permanganate, methalyn blue, malachite green, formalin, Amaglyden, Amoxycilin, Gentamycin, oxytetracycline)
Find out more...
Oily & Produced Water Treatment System
(Using EOH2OTM)
Oil companies have continually review new technologies for treatment of oily wastewater (Produced Water) in order to stay ahead of the ever increasing environmental regulation. The EOH2OTM process is an electrolytic oxidation process uniquely suited for the treatment of Produced Water, Barge and Bilge Water, and Drilling Mud for the reduction of Petroleum hydrocarbons.
The use of electrolytic oxidation for this purpose is new and uniquely situated as an economical solution for both on-shore and off-shore treatment processes. Its advantage over conventional systems has been well demonstrated, and surpasses several technology currently under development by other companies, including cross-flow and vibratory membrane technologies. Companies that have adopted the technology includes Varco, Petrofac, Enviroco, Tayors, BP Oil and Du Pont Global.
Find out more...
Pond Aeration System
Low levels of dissolved oxygen and highly stratified waters can characterize degraded or eutrophic ponds and lakes, where warm, oxygen-rich water is suspended above cool, oxygen-depleted bottom waters. As anaerobic conditions begin to develop in deeper water, naturally occurring aerobic bacteria can no longer perform beneficial tasks such as waste digestion and water purification. With time, water quality greatly decreases leading to unsightly blooms of algae, the accumulation of aquatic sludge and the build-up of gases such as methane and hydrogen sulfide (which are well known for their offensive odours). Low oxygen levels can also lead to fish death and water kill. Pond Aeration allows rectification of this problem.
Find out more...
Penetrant Rinsewater Treatment System
Penetrant rinsewater is required to be treated before it can be discharged into their facilities main treatment system or to treat the influent to an acceptable level safe for discharge into the sewer system. There are various methods of treatment process using ozonisation, membrane filtration, activated carbon filtration etc. Pureflow design utilise an innovative, cost effective and simple oil separator system to handle the oil and dye in the rinsewater.
Find out more...
Advanced Biological Treatment System
Membrane bioreactors (MBR) combines activated sludge treatment with a membrane liquid-solid separation process. Pureflow’s Advanced Biological System is an advance wastewater technique comprising of a biodegradation process coupled with membrane separation.
Find out more...
High Purity Water System
We specialize in designing and installing systems for water softening, ultra-filtration, deionization and ultrapure water production.
|
